Hydraulic Pump for Log Splitters, 16 GPM, 2 Stage, 3000 PSI

Description

16 GPM Log Splitter Pump
This brand new 16 GPM, 2-stage hydraulic log splitter gear pump is a must have for any wood splitter application.
A gear pump allows for high flow at low pressures, to increase cycle time speed, and high pressure when enough back pressure resistance occurs, like when splitting a log.
This pump is not designed for use with “universal” or "tractor" transmission oil, such as "303". Use of incorrect fluid may damage the pump and void the warranty.
We recommend using an Lovejoy-style jaw coupling (i.e., L095, which is the most common Lovejoy family used on log splitters) and mounting bracket to connect the pump to an engine. Couplings and mounting brackets are available.
Flow Rate: 16 GPM
Aluminum Body
Shaft Diameter: 1/2" (0.5 inch) shaft
Keyway: 1/8" (0.125 inch)
Inlet: 1"
Outlet: 1/2" NPT (
DO NOT
use an SAE Straight Thread O-Ring or O-Ring Boss [ORB] fitting)
Dimensions: 9" x 6.5" x 4"
Minimum engine size: 8 hp
Recommended Operating RPM: 3600
4.1 GPM@400/900 psi
12.4 GPM@3000 psi
Maximum Pressure: 3000 psi
Mounting Hardware NOT included
Bolt Circle: 2.85"
Spacing: 4 Bolt Holes Spaced 2" on Center
Bolt Hole Diameter: .344"
Rotation: Clockwise
Recommended Hydraulic Fluid Type: AW-32 10-Weight (ISO 32), AW-46 20-Weight (ISO 46), Dexron III ATF (automatic transmission fluid)
Suction-side filtration should be no finer than 150 micron. Use of a 10-25 micron filter on the suction side of the pump is too restrictive and will cause failure.
Make sure hydraulic fluid reservoir is not below pump to ensure a sufficient flow of oil to the pump.
We are a US seller based in Boston. All products ship from our US warehouse.
window.NREUM||(NREUM={});NREUM.info={"beacon":"bam-cell.nr-data.net","licenseKey":"32933b6325","applicationID":"66754545","transactionName":"ZgEAMkVZXEVZUEFdXV9LNxReF1ZTS1BHXUJFDQ0IGUhaRg==","queueTime":0,"applicationTime":130,"atts":"SkYDRA1DT0s=","errorBeacon":"bam-cell.nr-data.net","agent":""}